LOCATION:Home>>NEWS>>Company news

Talking about the advantages of all-electric plastic injection molding machine

2019-10-08Click:1102

The advantages of all-electric plastic injection molding machine: energy saving, low noise, high repeatability, easy maintenance, high reliability, etc., in line with the development trend of international plastic injection molding machines in recent years. details as follows:

The advantages of all-electric plastic injection molding machine: energy saving, low noise, high repeatability, easy maintenance, high reliability, etc., in line with the development trend of international plastic injection molding machines in recent years. details as follows:



1. High accuracy: Servo motor is used as the power source. It consists of a ball screw and a synchronous belt. It has a simple and highly efficient transmission mechanism. Its repeat accuracy error is 0.01%.

2. Energy saving: The energy released during the deceleration phase of the working cycle can be converted into electric energy for reuse, thereby reducing the operating cost, reducing the energy by more than 50% compared to the corresponding hydraulic drive plastic injection molding machine, and the connected electrical equipment is only hydraulic 25% of the electrical equipment required to drive plastic injection molding machines.

3. Precision injection control: make the product close to the limit of the raw material injection required. The position of the melt screw is controlled by digital precision, which reduces the back pressure and greatly reduces the tension in the mold cavity. It is especially suitable for optical components, medical appliances, food industries, etc. And plastic products with high cleanliness requirements.

4. Improve environmental protection level: Due to the reduction in the use of energy sources and its optimized performance, pollution sources have been reduced and noise has been reduced, which provides a better guarantee for the environmental protection work of the factory.

5. Reduce noise: its operating noise value is less than 70 decibels, which is about 2/3 of the noise value of hydraulically driven plastic injection molding machines.

6. Cost saving: This machine removes the cost and trouble caused by hydraulic oil, no hard pipes or soft hoses, no need to cool hydraulic oil, and greatly reduces the cost of cooling water.

7. The production cycle is short, for example: At the Shanghai International Plastic Machinery Exhibition that year, Japan's NISSEI company exhibited an ES200 all-electric plastic injection molding machine, which was so fast that it was hard to believe that a product production cycle only required 0.63 S (second), mold closing time is 0.1 second, mold opening is 0.13 second.

RETURN TAGS: