LOCATION:Home>>NEWS>>FAQ

What should I pay attention to before the injection molding machine starts and stops?

2019-10-08Click:944

As is known to all, injection molding machines heat plastics, apply high pressure to molten plastics, spray them out, and fill them with mold cavities, that is...

As is known to all, injection molding machines heat plastics, apply high pressure to molten plastics, spray them out, and fill them with mold cavities, that is, thermoplastics or thermosetting plastics are used to make various shapes of plastic products into the main molding device.



     So, for some newbies, what should I pay attention to before the injection molding machine starts and stops? Here is the specific analysis of the editor:

   

  1. Inspection of sports oil: determine whether the amount of active oil is between the minimum and maximum limits of the oil gauge. Check if the amount of oil in the automatic injector for curved hand lubrication is appropriate.

   

  2. Inspection of cooling water: determine whether there is no leakage in the cooling water pipeline system and whether the amount of water is sufficient to maintain the normal cooling effect.

   

  3. Temperature opening and checking: determine whether the electric heating on the dryer, material tube and crystallizer is normal, especially when the temperature of the material tube must fully reach the set temperature, then the operation of target shooting, loosening and winch can be performed. .

RETURN TAGS: